@inproceedings{Bartelt.2018,
  author = {Bartelt, M. and Kuhlenkötter, B.},
  title = {Involving the Manufacturing System within its Planning Phase},
  booktitle = {2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)},
  year = {2018},
  pages = {1120--1124},
  doi = {http://dx.doi.org/10.1109/IEEM.2018.8607579}
}

@inproceedings{Bartelt.2018b,
  author = {Bartelt, Matthias and Stecken, Jannis and Kuhlenkötter, Bernd},
  title = {Microservice zur Erzeugung von digitalen Zwillingen: Microservice for deriving digital twins},
  booktitle = {Automation 2018},
  series = {VDI-Berichte},
  publisher = {VDI Verlag GmbH},
  year = {2018},
  pages = {679--690}
}

@article{Bartelt.2018c,
  author = {Bartelt, Matthias and Stecken, Jannis and Strahilov, Anton and Kuhlenkötter, Bernd},
  title = {Softwareframework für die Energieoptimierung von Produktionssystemen: Messung, Prädiktion und Anpassung der Energienutzung},
  journal = {productivITy},
  year = {2018},
  volume = {23},
  number = {1},
  pages = {37--39}
}

@incollection{Block.2018,
  author = {Block, Christian},
  title = {Agentensysteme},
  booktitle = {Entscheidungsunterstützung in der Produktionsplanung und -steuerung},
  publisher = {Shaker Verlag},
  year = {2018},
  pages = {28--37},
  editor = {Herrmann, Klaus and Kreimeier, Dieter}
}

@incollection{Block.2018b,
  author = {Block, Christian and Burges, Ulrich},
  title = {Einheitliches Datenmodell},
  booktitle = {Entscheidungsunterstützung in der Produktionsplanung und -steuerung},
  publisher = {Shaker Verlag},
  year = {2018},
  pages = {38--45},
  editor = {Herrmann, Klaus and Kreimeier, Dieter}
}

@inproceedings{Block.2018c,
  author = {Block, Christian and Kreimeier, Dieter and Kuhlenkötter, Bernd},
  title = {Holistic approach for teaching IT skills in a production environment},
  booktitle = {Procedia Manufacturing 8th CIRP Conference on Learning Factories - Advanced Engineering Education & Training for},
  year = {2018},
  volume = {23},
  pages = {57--62},
  editor = {Mourtzis, Dimitris and Chryssolouris, George},
  doi = {http://dx.doi.org/10.1016/j.promfg.2018.03.161}
}

@inproceedings{Block.2018e,
  author = {Block, Christian and Kuhlenkötter, Bernd},
  title = {Ereignisdiskrete Simulationsumgebung zur Entscheidungsunterstützung in der Produktion – Ein KMU tauglicher Ansatz},
  booktitle = {Smarte Produktion und digitale Vernetzung: Wissenschaftliche Schriftenreihe des Institutes für Betriebswissenschaften und Fabriksysteme},
  series = {Sonderheft 24},
  year = {2018},
  pages = {143--152},
  editor = {Riedel, Ralph}
}

@article{Block.2018d,
  author = {Block, Christian and Kuhlenkötter, Bernd},
  title = {Blockchain in der Produktion - Ein Ansatz zur manipulationsfreien sowie dezentralen Speicherung von Daten in der Montage von Morgen},
  journal = {Industrie 4.0 Management},
  year = {2018},
  number = {2},
  pages = {21--24}
}

@inproceedings{Block.2018f,
  author = {Block, Christian and Lins, Dominik and Kuhlenkötter, Bernd},
  title = {Approach for a simulation-based and event-driven production planning and control in decentralized manufacturing execution systems},
  booktitle = {Procedia CIRP 51st CIRP Conference on Manufacturing Systems},
  year = {2018},
  volume = {72},
  pages = {1351--1356},
  editor = {Wang, Lihui},
  doi = {http://dx.doi.org/10.1016/j.procir.2018.03.204}
}

@inproceedings{Forgo.2018,
  author = {Forgó, Zoltán and Hypki, Alfred and Kuhlenkötter, Bernd},
  title = {Gesture based robot programming using ROS platform},
  booktitle = {Proceedings of the 50th International Symposium on Robotics ISR 2018, June 20-21, Messe München, Munich, Germany},
  publisher = {VDE VERLAG GMBH, Berlin, Offenbach},
  year = {2018},
  pages = {455--460},
  editor = {VDMA and VDE and ITG and IFR}
}

@article{Franzen.2018,
  author = {Franzen, Julian and Kuhlenkötter, Bernd},
  title = {Präskriptive Analyse im Kontext der Instandhaltung von Schienenfahrzeugen},
  journal = {Eisenbahntechnische Rundschau},
  year = {2018},
  number = {12/2018},
  pages = {64--66}
}

@inproceedings{Franzen.2018b,
  author = {Franzen, Julian and Pinders, Udo and Lingen, Michael and Kuhlenkötter, Bernd},
  title = {Entwicklung eines Systems zur Senkung der Lebenszykluskosten durch Einsatz proaktiver Wartungsstrategien},
  booktitle = {16. Internationale Schienenfahrzeugtagung Dresden},
  year = {2018},
  pages = {157--159}
}

@incollection{Glogowski.2018b,
  author = {Glogowski, Paul and Lemmerz, Kai and Hypki, Alfred and Kuhlenkötter, Bernd},
  title = {ROS-Based Robot Simulation in Human-Robot Collaboration},
  booktitle = {Developing Support Technologies},
  series = {Biosystems & Biorobotics},
  publisher = {Springer International Publishing},
  year = {2018},
  pages = {237--246},
  editor = {Karafillidis, Athanasios and Weidner, Robert},
  doi = {http://dx.doi.org/10.1007/978-3-030-01836-8{\textunderscore}
}

@inproceedings{Glogowski.2018,
  author = {Glogowski, Paul and Lemmerz, Kai and Hypki, Alfred and Kuhlenkötter, Bernd},
  title = {Menschzentrierte Simulation mit adaptiver kollisionsfreier Roboterbahnplanung in der Mensch-Roboter-Kollaboration},
  booktitle = {3. Transdisziplinäre Konferenz „Technische Unterstützungssysteme, die die Menschen wirklich wollen“},
  year = {2018}
}

@article{Gromann.2018,
  author = {Großmann, Christian and Kuhlenkötter, Bernd and Kutschinski, Jürgen and Linsinger, Matthias},
  title = {Montage im Schaltschrankbau: Forschungskooperation zeigt, wie es kostengünstiger und schneller geht},
  journal = {Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe},
  year = {2018},
  number = {Ausgabe 11-12},
  pages = {18--20}
}

@incollection{Hengstebeck.2018,
  author = {Hengstebeck, André and Weisner, Kirsten and Deuse, Jochen and Rossmann, Jürgen and Kuhlenkötter, Bernd},
  title = {Betriebliche Auswirkungen industrieller Servicerobotik am Beispiel der Kleinteilemontage},
  booktitle = {Zukunft der Arbeit – Eine praxisnahe Betrachtung},
  publisher = {Springer Berlin Heidelberg},
  year = {2018},
  pages = {51--61},
  editor = {Wischmann, Steffen and Hartmann, Ernst Andreas},
  doi = {http://dx.doi.org/10.1007/978-3-662-49266-6{\textunderscore}
}

@inproceedings{Leineweber.2018,
  author = {Leineweber, Stefan and Wienbruch, Thom and Kuhlenkötter, Bernd},
  title = {Konzept zur Unterstützung der Digitalen Transformation von Kleinen und Mittelständischen Unternehmen},
  booktitle = {KMU 4.0 - digitale Transformation in kleinen und mittelständischen Unternehmen},
  series = {Schriftenreihe der Wissenschaftlichen Gesellschaft für Arbeits- und Betriebsorganisation},
  publisher = {GITO},
  year = {2018},
  pages = {21--40},
  editor = {Matt, Dominik}
}

@inproceedings{Leineweber.2018b,
  author = {Leineweber, Stefan and Wienbruch, Thom and Lins, Dominik and Kreimeier, Dieter and Kuhlenkötter, Bernd},
  title = {Concept for an evolutionary maturity based Industrie 4.0 migration model},
  booktitle = {Procedia CIRP 51st CIRP Conference on Manufacturing Systems},
  year = {2018},
  volume = {72},
  pages = {404--409},
  editor = {Wang, Lihui},
  doi = {http://dx.doi.org/10.1016/j.procir.2018.03.155}
}

@inproceedings{Lemmerz.2018,
  author = {Lemmerz, Kai and Glogowski, Paul and Hypki, Alfred and Kuhlenkötter, Bernd},
  title = {Functional Integration of a Robotics Software Framework into a Human Simulation System},
  booktitle = {50th International Symposium on Robotics (ISR 2018)},
  year = {2018}
}

@article{Lins.2018c,
  author = {Lins, Dominik and Prinz, Christopher and Kuhlenkötter, Bernd},
  title = {Industrie 4.0-Umsetzungsstand bei Industrieunternehmen in NRW},
  journal = {ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb},
  year = {2018},
  volume = {113},
  number = {5},
  pages = {333--336},
  doi = {http://dx.doi.org/10.3139/104.111902}
}

@article{Lins.2018,
  author = {Lins, Dominik and Ruhe, Arne Hendrik and Bicer, Enis and Schäfer, Marvin and Palomo, Mark Esteban and Filipiak, Kathrin and Niewerth, Claudia and Kreimeier, Dieter and Welling, Stefan and Wannöffel, Manfred},
  title = {Industrie 4.0: Mitbestimmen – mitgestalten: Umsetzungsstand von Industrie 4.0 in nordrhein-westfälischen Industrieunternehmen (Impuls)},
  journal = {FGW-Impuls Digitalisierung von Arbeit},
  year = {2018}
}

@article{Lins.2018b,
  author = {Lins, Dominik and Ruhe, Arne Hendrik and Bicer, Enis and Schäfer, Marvin and Palomo, Mark Esteban and Filipiak, Kathrin and Niewerth, Claudia and Kreimeier, Dieter and Welling, Stefan and Wannöffel, Manfred},
  title = {Industrie 4.0: Mitbestimmen – mitgestalten: Umsetzungsstand von Industrie 4.0 in nordrhein-westfälischen Industrieunternehmen (Studie)},
  journal = {FGW-Studie Digitalisierung von Arbeit},
  year = {2018}
}

@inproceedings{Linsinger.2018,
  author = {Linsinger, Matthias and Kutschinski, Jürgen and Stecken, Jannis and Kuhlenkötter, Bernd},
  title = {Mensch-Roboter-Kollaboration im Schaltschrankbau - Konzept zum Setzen von Endhalterklemmen bei der Klemmleistenmontage},
  booktitle = {Automation 2018},
  series = {VDI-Berichte},
  publisher = {VDI Verlag GmbH},
  year = {2018},
  pages = {95--107}
}

@inproceedings{Linsinger.2018b,
  author = {Linsinger, Matthias and Sudhoff, Martin and Lemmerz, Kai and Glogowski, Paul and Kuhlenkötter, Bernd},
  title = {Task-based Potential Analysis for Human-Robot Collaboration within Assembly Systems},
  booktitle = {Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter},
  publisher = {Springer Berlin Heidelberg},
  year = {2018},
  pages = {1--12},
  editor = {Schüppstuhl, Thorsten and Tracht, Kirsten and Franke, Jörg},
  doi = {http://dx.doi.org/10.1007/978-3-662-56714-2{\textunderscore}
}

@article{Min.2018,
  author = {Min, Junying and Kuhlenkötter, Bernd and Shu, Changle and Störkle, Denis and Thyssen, Lars},
  title = {Experimental and numerical investigation on incremental sheet forming with flexible die-support from metallic foam},
  journal = {Journal of Manufacturing Processes},
  year = {2018},
  volume = {31},
  pages = {605--612},
  doi = {http://dx.doi.org/10.1016/j.jmapro.2017.12.013}
}

@article{Oberc.2018,
  author = {Oberc, Henning},
  title = {Betriebsräte gehen in die Lernfabrik},
  journal = {Computer und Arbeit,},
  year = {2018},
  pages = {12--14}
}

@inproceedings{Oberc.2018b,
  author = {Oberc, Henning and Reuter, Melissa and Wannöffel, Manfred and Kuhlenkötter, Bernd},
  title = {Development of a learning factory concept to train participants regarding digital and human centered decision support},
  booktitle = {Procedia Manufacturing},
  year = {2018},
  pages = {165--170}
}

@article{Prinz.2018,
  author = {Prinz, Christopher and Kreggenfeld, Niklas and Kuhlenkötter, Bernd},
  title = {Lean meets Industrie 4.0 – a practical approach to interlink the method world and cyber-physical world},
  journal = {Procedia Manufacturing},
  year = {2018},
  volume = {23},
  pages = {21--26},
  doi = {http://dx.doi.org/10.1016/j.promfg.2018.03.155}
}

@inproceedings{Prinz.2018b,
  author = {Prinz, Christopher and Kreimeier, Dieter and Kuhlenkötter, Bernd and Weimin, Zhang and Min, Junying},
  title = {Learning Factories – Qualification Training Within A Real-world Production Environment},
  booktitle = {Proceedings of the 12th International Conference on Modern Industrial Training},
  year = {2018}
}

@inproceedings{Schaffer.2018,
  author = {Schäffer, Eike and Bartelt, Matthias and Pownuk, Tobias and Schulz, Jan-Peter and Kuhlenkötter, Bernd and Franke, Jörg},
  title = {Configurators as the basis for the transfer of knowledge and standardized communication in the context of robotics},
  booktitle = {Procedia CIRP 51st CIRP Conference on Manufacturing Systems},
  year = {2018},
  volume = {72},
  pages = {310--315},
  editor = {Wang, Lihui},
  doi = {http://dx.doi.org/10.1016/j.procir.2018.03.190}
}

@inproceedings{Schaffer.2018b,
  author = {Schäffer, Eike and Pownuk, Tobias and Walberer, Joonas and Fischer, Andreas and Schulz, Jan-Peter and Kleinschnitz, Marco and Bartelt, Matthias and Kuhlenkötter, Bernd and Franke, Jörg},
  title = {System architecture and conception of a standardized robot configurator based on microservices},
  booktitle = {Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter},
  publisher = {Springer Berlin Heidelberg},
  year = {2018},
  pages = {159--166},
  editor = {Schüppstuhl, Thorsten and Tracht, Kirsten and Franke, Jörg},
  doi = {http://dx.doi.org/10.1007/978-3-662-56714-2{\textunderscore}
}

@inproceedings{Spies.2018,
  author = {Spies, Stefanie and Kuhlenkötter, Bernd},
  title = {Adaptive Online-Anpassung der Roboterbahn zur Reduzierung der am Effektor wirkenden Greifkräfte: Adaptive online adaption of the robot path to reduce the dynamic forces acting at the effector},
  booktitle = {Automation 2018},
  series = {VDI-Berichte},
  publisher = {VDI Verlag GmbH},
  year = {2018},
  pages = {123--133}
}

@inproceedings{Spies.2018b,
  author = {Spies, Stefanie and Portela, Miguel Angel Villanueva and Bartelt, Matthias and Hypki, Alfred and Ebert, Benedikt and Ramirez, Ricardo E. and Kuhlenkötter, Bernd},
  title = {Force-controlled Solution for Non-destructive Handling of Sensitive Objects},
  booktitle = {Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter},
  publisher = {Springer Berlin Heidelberg},
  year = {2018},
  pages = {57--64},
  editor = {Schüppstuhl, Thorsten and Tracht, Kirsten and Franke, Jörg},
  doi = {http://dx.doi.org/10.1007/978-3-662-56714-2{\textunderscore}
}

@inproceedings{Storkle.2018,
  author = {Störkle, Denis Daniel and Möllensiep, Dennis and Thyssen, Lars and Kuhlenkötter, Bernd},
  title = {Geometry-dependent parameterization of local support in robot-based incremental sheet forming},
  booktitle = {Procedia Manufacturing 17th International Conference on Metal Forming, Metal Forming 2018},
  year = {2018},
  volume = {15},
  pages = {1164--1169},
  doi = {http://dx.doi.org/10.1016/j.promfg.2018.07.373}
}

@article{Tillmann.2018,
  author = {Tillmann, Wolfgang and Schaak, Christopher and Zajaczkowski, Jonas and Müller, Heinrich and Hegels, Daniel and Gaspar, Marcel and Kuhlenkötter, Bernd and Störkle, Denis Daniel},
  title = {Investigation into the properties of HVOF-sprayed WC-Co coatings on plane and complex surfaces, manufactured with an evolution-based path planning method},
  journal = {Thermal Spray Bulletin},
  year = {2018},
  number = {11},
  pages = {95--102}
}

@incollection{Ullrich.2018b,
  author = {Ullrich, Carsten and Hauser-Ditz, Axel and Kreggenfeld, Niklas and Prinz, Christopher and Igel, Christoph},
  title = {Assistenz und Wissensvermittlung am Beispiel von Montage- und Instandhaltungstätigkeiten},
  booktitle = {Zukunft der Arbeit - eine praxisnahe Betrachtung},
  series = {Open},
  publisher = {Springer Vieweg},
  year = {2018},
  pages = {107--122},
  editor = {Wischmann, Steffen and Hartmann, Ernst}
}

@incollection{Ullrich.2018,
  author = {Ullrich, Carsten and Hauser-Ditz, Axel and Kreggenfeld, Niklas and Prinz, Christopher and Igel, Christoph},
  title = {Assistenz und Wissensvermittlung am Beispiel von Montage- und Instandhaltungstätigkeiten},
  booktitle = {Zukunft der Arbeit – Eine praxisnahe Betrachtung},
  publisher = {Springer Berlin Heidelberg},
  year = {2018},
  pages = {107--122},
  editor = {Wischmann, Steffen and Hartmann, Ernst Andreas},
  doi = {http://dx.doi.org/10.1007/978-3-662-49266-6{\textunderscore}
}

@inproceedings{Wienbruch.2018,
  author = {Wienbruch, Thom and Leineweber, Stefan and Kreimeier, Dieter and Kuhlenkötter, Bernd},
  title = {Evolution of SMEs towards Industrie 4.0 through a scenario based learning factory training},
  booktitle = {Procedia Manufacturing 8th CIRP Conference on Learning Factories - Advanced Engineering Education & Training for},
  year = {2018},
  volume = {23},
  pages = {141--146},
  editor = {Mourtzis, Dimitris and Chryssolouris, George},
  doi = {http://dx.doi.org/10.1016/j.promfg.2018.04.007}
}

@book{Herrmann.2018,,
  title = {Entscheidungsunterstützung in der Produktionsplanung und -steuerung: Kompendium zum Forschungsprojekt SOPHIE},
  publisher = {Shaker Verlag},
  year = {2018},
  editor = {Herrmann, Klaus and Kreimeier, Dieter}
}