MB » LPS » Profil

Publikationen 2008

 

Settings...


Matching entries/Suchtreffer: 0

 

Author/
Autor
Title/
Titel
Year/
Jahr
Journal/
Proceedings/
Book
Chung, W., Fu, L.-C. and Hsu, S.-H. Motion Control 2008 Springer Handbook of Robotics,  
BibTeX:
@incollection{Chung.2008,
  author = {Chung, Wankyun and Fu, Li-Chen and Hsu, Su-Hau},
  title = {Motion Control},
  booktitle = {Springer Handbook of Robotics},
  publisher = {Springer Verlag},
  year = {2008},
  editor = {Siciliano, Bruno and Khatib, Oussama}
}
Fleischer, Jü., Meier, H., Kaiser, U., Krings, R. and Niggeschmidt, S. Bewertung und Konfiguration von Dienstleistungsangeboten in der hybriden Wertschöpfungskette 2008 wt Werkstattstechnik online,
Vol. 7/8, pp. 601-606  
BibTeX:
@article{Fleischer.2008,
  author = {Fleischer, Jürgen and Meier, Horst and Kaiser, Uwe and Krings, Robin and Niggeschmidt, Stephan},
  title = {Bewertung und Konfiguration von Dienstleistungsangeboten in der hybriden Wertschöpfungskette},
  journal = {wt Werkstattstechnik online},
  year = {2008},
  volume = {7/8},
  pages = {601--606}
}
Franke, H.-J., Pavlovic, N., Kirchhoff, M. R. and Büttgenbach, S. Integration of Sensors and Actuators in Joints of Parallel Robots 2008 3rd International Colloquium of the SFB 562, Robotic Systems for Handling and Assembly, pp. 169-180  
BibTeX:
@inproceedings{Franke.2008,
  author = {Franke, Hans-Joachim and Pavlovic, Nenad and Kirchhoff, Maren Ramona and Büttgenbach, Stephanus},
  title = {Integration of Sensors and Actuators in Joints of Parallel Robots},
  booktitle = {3rd International Colloquium of the SFB 562},
  series = {Robotic Systems for Handling and Assembly},
  publisher = {Shaker Verlag},
  year = {2008},
  pages = {169--180}
}
Keimer, R. and Sinapius, M. Adaptive Components for Parallel Robots 2008 Robotic Systems for Handling and Assembly, pp. 181-190  
BibTeX:
@inproceedings{Keimer.2008,
  author = {Keimer, Ralf and Sinapius, Michael},
  title = {Adaptive Components for Parallel Robots},
  booktitle = {Robotic Systems for Handling and Assembly},
  publisher = {Shaker Verlag},
  year = {2008},
  pages = {181--190}
}
Meier, H., Abele, E., Bauer, Jö., Bertsch, C., Laurischkat, R., Reese, S., Stelzer, M. and Stryk, O. v. Comparison of Implementations of a Flexible Joint Multibody Dynamics System Model for an Industrial Robot 2008 Proceedings of the 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME),  
BibTeX:
@inproceedings{Meier.2008w,
  author = {Meier, Horst and Abele, Eberhard and Bauer, Jörg and Bertsch, Christine and Laurischkat, Roman and Reese, Stefanie and Stelzer, Maximilian and Stryk, Oskar von},
  title = {Comparison of Implementations of a Flexible Joint Multibody Dynamics System Model for an Industrial Robot},
  booktitle = {Proceedings of the 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME)},
  year = {2008}
}
BibTeX:
@inproceedings{Meier.2008x,
  author = {Meier, Horst and Alich, Ines and Flick, Holger},
  title = {Efficient database and web service design for confidential patient data in the TEMONICS project},
  booktitle = {Proceedings of the 4th European Conference of International Federation for Medical and Biological Engineering},
  publisher = {Springer Verlag},
  year = {2008},
  volume = {22},
  pages = {998--1001},
  doi = {http://dx.doi.org/10.1007/978-3-540-89208-3}
}
Meier, H., Alich, I. and Flick, H. TEMONICS - Telemonitoring with cardiorespiratory systems, Teleüberwachung von Lungen- und Herz-Kreislauf-Patienten 2008 1. Ambient Assisted Living Tagungsband 2008, pp. 189-191  
BibTeX:
@inproceedings{Meier.2008y,
  author = {Meier, Horst and Alich, Ines and Flick, Holger},
  title = {TEMONICS - Telemonitoring with cardiorespiratory systems, Teleüberwachung von Lungen- und Herz-Kreislauf-Patienten},
  booktitle = {1. Ambient Assisted Living Tagungsband 2008},
  publisher = {VDE Verlag},
  year = {2008},
  pages = {189--191}
}
Meier, H., Binner, S. M. and Quade, N. Availability-Management of Production Systems Using a Rule-Based In-Line Condition Information System 2008 Proceedings of the 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME),  
BibTeX:
@inproceedings{Meier.2008z,
  author = {Meier, Horst and Binner, Sebastian M. and Quade, Nicole},
  title = {Availability-Management of Production Systems Using a Rule-Based In-Line Condition Information System},
  booktitle = {Proceedings of the 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME)},
  year = {2008}
}
Meier, H., Czechowicz, A. and Dilthey, S. Regelungskonzept für Formgedächtnislegierungen mit Widerstandsrückkopplung 2008 Mechatronik F+M,
Vol. 11/12, pp. 24-27  
BibTeX:
@article{Meier.2008ab,
  author = {Meier, Horst and Czechowicz, Alexander and Dilthey, Sascha},
  title = {Regelungskonzept für Formgedächtnislegierungen mit Widerstandsrückkopplung},
  journal = {Mechatronik F+M},
  year = {2008},
  volume = {11/12},
  pages = {24--27}
}
Meier, H. and Dilthey, S. Shape Memory Actuator Design Based on a Numerical Simulation 2008 Conference Proceedings of the 11th International Conference on New Actuators (ACTUATOR 2008), pp. 390-393  
BibTeX:
@inproceedings{Meier.2008ad,
  author = {Meier, Horst and Dilthey, Sascha},
  title = {Shape Memory Actuator Design Based on a Numerical Simulation},
  booktitle = {Conference Proceedings of the 11th International Conference on New Actuators (ACTUATOR 2008)},
  publisher = {HVG Hanseatische Veranstaltungs-GmbH},
  year = {2008},
  pages = {390--393}
}
Meier, H., Funke, B., Krings, R. and Krug, C. Case Study Based Service Process Library Supporting the Resource Planning for Industrial Product-Service-Systems (IPS$^2$) 2008 Proceedings of the 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME),
Vol. 2,  
BibTeX:
@inproceedings{Meier.2008am,
  author = {Meier, Horst and Funke, Birgit and Krings, Robin and Krug, Christian},
  title = {Case Study Based Service Process Library Supporting the Resource Planning for Industrial Product-Service-Systems (IPS$^2$)},
  booktitle = {Proceedings of the 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME)},
  year = {2008},
  volume = {2}
}
Meier, H., Golembiewski, M. and Quade, N. Design Concept for a transparent Supply Chain 2008 WGP Journal - Production Engineering Research and Development,
Vol. 2, (3), pp. 311-315  
BibTeX:
@article{Meier.2008ae,
  author = {Meier, Horst and Golembiewski, Marcus and Quade, Nicole},
  title = {Design Concept for a transparent Supply Chain},
  journal = {WGP Journal - Production Engineering Research and Development},
  year = {2008},
  volume = {2},
  number = {3},
  pages = {311--315}
}
Meier, H., Gu, R. and Kroll, M. Approach of the Design for the Structure of Global Distribution of Industrial Service 2008 Proceedings of the 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME),  
BibTeX:
@inproceedings{Meier.2008af,
  author = {Meier, Horst and Gu, Rongxin and Kroll, Michael},
  title = {Approach of the Design for the Structure of Global Distribution of Industrial Service},
  booktitle = {Proceedings of the 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME)},
  year = {2008}
}
Meier, H., Gu, R., Kroll, M. and Kaiser, U. Design of a cooperative organization for a machine's life cycle based service provision 2008 The IEEE International Conference on Service Operations and Logistics, and Informatics (IEEE/SOLI'2008), pp. 270-275  
BibTeX:
@inproceedings{Meier.2008ag,
  author = {Meier, Horst and Gu, Rongxin and Kroll, Michael and Kaiser, Uwe},
  title = {Design of a cooperative organization for a machine's life cycle based service provision},
  booktitle = {The IEEE International Conference on Service Operations and Logistics, and Informatics (IEEE/SOLI'2008)},
  year = {2008},
  pages = {270--275},
  doi = {http://dx.doi.org/10.1109/SOLI.2008.4686404}
}
Meier, H. and Haberland, C. Experimental studies on selective laser melting of metallic parts 2008 Mat.-wiss. u. Werkstofftech.,
Vol. 39, (9), pp. 665-670  
BibTeX:
@article{Meier.2008ah,
  author = {Meier, Horst and Haberland, Christoph},
  title = {Experimental studies on selective laser melting of metallic parts},
  journal = {Mat.-wiss. u. Werkstofftech.},
  year = {2008},
  volume = {39},
  number = {9},
  pages = {665--670},
  doi = {http://dx.doi.org/10.1002/mawe.200800327}
}
Meier, H., Hammelmann, R., Theisen, W. and Moll, H. Application of Powder Metallurgical Coatings on Ring Shaped Parts by Rolling 2008 Proceedings of the 17th IFM, pp. 251-258  
BibTeX:
@inproceedings{Meier.2008ai,
  author = {Meier, Horst and Hammelmann, Robert and Theisen, Werner and Moll, Heiko},
  title = {Application of Powder Metallurgical Coatings on Ring Shaped Parts by Rolling},
  booktitle = {Proceedings of the 17th IFM},
  year = {2008},
  pages = {251--258}
}
Meier, H. and Homuth, M. Stückzahlprognose für Serienanläufe in Produktionsnetzwerken 2008 Industrie Management,
Vol. 2, pp. 63-66  
BibTeX:
@article{Meier.2008aj,
  author = {Meier, Horst and Homuth, Michael},
  title = {Stückzahlprognose für Serienanläufe in Produktionsnetzwerken},
  journal = {Industrie Management},
  year = {2008},
  volume = {2},
  pages = {63--66}
}
BibTeX:
@incollection{Meier.2008ak,
  author = {Meier, Horst and Kaiser, Uwe and Flick, Holger},
  title = {Service Prozess Bibliothek zur Konfiguration von Dienstleistungserbringungsprozessen in kooperativen Wertschöpfungsnetzwerken},
  booktitle = {Technologiegetriebene Veränderungen der Arbeitswelt},
  series = {Schriftreihe der Hochschulgruppe für Arbeits-und Betriebsorganisation e.V. (HAB)},
  publisher = {Gito-Verlag},
  year = {2008},
  pages = {279--292},
  editor = {Scholz-Reiter, Bernd}
}
Meier, H., Kaiser, U. and Krings, R. Erfolg mit dem optimalen Dienstleistungsangebot 2008 ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb,
Vol. 10, pp. 696-699  
BibTeX:
@article{Meier.2008al,
  author = {Meier, Horst and Kaiser, Uwe and Krings, Robin},
  title = {Erfolg mit dem optimalen Dienstleistungsangebot},
  journal = {ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb},
  year = {2008},
  volume = {10},
  pages = {696--699}
}
Meier, H., Kaiser, U. and Krings, R. Service as Enabler for Lifecycle-Oriented Business Models 2008 Proceedings of the 15th CIRP International Conference on Life Cycle Engineering (LCE),  
BibTeX:
@inproceedings{Meier.2008v,
  author = {Meier, Horst and Kaiser, Uwe and Krings, Robin},
  title = {Service as Enabler for Lifecycle-Oriented Business Models},
  booktitle = {Proceedings of the 15th CIRP International Conference on Life Cycle Engineering (LCE)},
  year = {2008}
}
Meier, H., Kaiser, U. and Kroll, M. Structuring of service packages along the machine life cycle 2008 Proceedings of the 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME),  
BibTeX:
@inproceedings{Meier.2008ac,
  author = {Meier, Horst and Kaiser, Uwe and Kroll, Michael},
  title = {Structuring of service packages along the machine life cycle},
  booktitle = {Proceedings of the 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME)},
  year = {2008}
}
Meier, H., Krings, R. and Kaiser, U. Standardization within the Service Creation Process in Value Generating Networks 2008 Advances in Manufacturing Technology - XXII, Proceedings of the 6th International Conference on Manufacturing Research (ICMR08), pp. 531-538  
BibTeX:
@inproceedings{Meier.2008,
  author = {Meier, Horst and Krings, Robin and Kaiser, Uwe},
  title = {Standardization within the Service Creation Process in Value Generating Networks},
  booktitle = {Advances in Manufacturing Technology - XXII, Proceedings of the 6th International Conference on Manufacturing Research (ICMR08)},
  year = {2008},
  pages = {531--538}
}
Meier, H., Krings, R. and Kaiser, U. Service process redesign in cooperative value generating manufacturing networks 2008 The International Journal of Advanced Manufacturing Technology,
Vol. 24, (170),  
BibTeX:
@article{Meier.2008i,
  author = {Meier, Horst and Krings, Robin and Kaiser, Uwe},
  title = {Service process redesign in cooperative value generating manufacturing networks},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2008},
  volume = {24},
  number = {170}
}
Meier, H., Krings, R. and Kaiser, U. Analysis and Design Optimization of Service Delivery Processes in Cooperative Value Generating Manufacturing Networks 2008 Proceedings of the CIRP Design Conference,  
BibTeX:
@inproceedings{Meier.2008u,
  author = {Meier, Horst and Krings, Robin and Kaiser, Uwe},
  title = {Analysis and Design Optimization of Service Delivery Processes in Cooperative Value Generating Manufacturing Networks},
  booktitle = {Proceedings of the CIRP Design Conference},
  year = {2008}
}
Meier, H. and Kroll, M. From Leadership in Technology to Leadership in Customer Value - A Service based Approach for the Machine Tool Industry 2008 Proceedings of the 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference, pp. 21-29  
BibTeX:
@inproceedings{Meier.2008b,
  author = {Meier, Horst and Kroll, Michael},
  title = {From Leadership in Technology to Leadership in Customer Value - A Service based Approach for the Machine Tool Industry},
  booktitle = {Proceedings of the 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference},
  year = {2008},
  pages = {21--29}
}
Meier, H. and Krug, C. An Approach for Sustainable Resource Planning by Modelling the Processes of IPS$^2$ 2008 Proceedings of the 15th CIRP International Conference on Life Cycle Engineering (LCE), pp. 535-540  
BibTeX:
@inproceedings{Meier.2008c,
  author = {Meier, Horst and Krug, Christian},
  title = {An Approach for Sustainable Resource Planning by Modelling the Processes of IPS$^2$},
  booktitle = {Proceedings of the 15th CIRP International Conference on Life Cycle Engineering (LCE)},
  year = {2008},
  pages = {535--540}
}
Meier, H. and Krug, C. System for Planning of Resources in IPS$^2$-Delivery 2008 Proceedings of the CIRP-MS Conference, pp. 469-472  
BibTeX:
@inproceedings{Meier.2008d,
  author = {Meier, Horst and Krug, Christian},
  title = {System for Planning of Resources in IPS$^2$-Delivery},
  booktitle = {Proceedings of the CIRP-MS Conference},
  publisher = {Springer Verlag},
  year = {2008},
  pages = {469--472}
}
Meier, H., Nahr, M., Flick, H. and Siebel, C. Produktpiraterie in der Investitionsgüterindustrie 2008 ERP-Management,
Vol. 4, pp. 13-15  
BibTeX:
@article{Meier.2008e,
  author = {Meier, Horst and Nahr, Michael and Flick, Holger and Siebel, Christian},
  title = {Produktpiraterie in der Investitionsgüterindustrie},
  journal = {ERP-Management},
  year = {2008},
  volume = {4},
  pages = {13--15}
}
Meier, H. and Quade, N. Optimierung von Geschäfts- und Produktionsprozessen in kleinen und mittleren Unternehmen 2008 Beiträge der Arbeits- und Betriebsorganisation zur Beschäftigungssicherung, pp. 15-27  
BibTeX:
@incollection{Meier.2008f,
  author = {Meier, Horst and Quade, Nicole},
  title = {Optimierung von Geschäfts- und Produktionsprozessen in kleinen und mittleren Unternehmen},
  booktitle = {Beiträge der Arbeits- und Betriebsorganisation zur Beschäftigungssicherung},
  publisher = {Gabler Verlag},
  year = {2008},
  pages = {15--27},
  editor = {Zülch, Gert}
}
Meier, H., Reese, S., Bertsch, C. and Laurischkat, R. Increase of the Dimensional Accuracy of Sheet Metal Parts Utilizing a Model-Based Path Design for Robot-Based Forming Processes 2008 Proceedings of the 1st International Conference on Process Machine Interaction (PMI), pp. 141-148  
BibTeX:
@inproceedings{Meier.2008g,
  author = {Meier, Horst and Reese, Stefanie and Bertsch, Christine and Laurischkat, Roman},
  title = {Increase of the Dimensional Accuracy of Sheet Metal Parts Utilizing a Model-Based Path Design for Robot-Based Forming Processes},
  booktitle = {Proceedings of the 1st International Conference on Process Machine Interaction (PMI)},
  year = {2008},
  pages = {141--148}
}
Meier, H. and Sadek, K. Customer Solutions - Ein Erfolgsgarant für Unternehmen des sekundären Sektors? 2008 Industrie Management,
Vol. 5, pp. 45  
BibTeX:
@article{Meier.2008h,
  author = {Meier, Horst and Sadek, Katja},
  title = {Customer Solutions - Ein Erfolgsgarant für Unternehmen des sekundären Sektors?},
  journal = {Industrie Management},
  year = {2008},
  volume = {5},
  pages = {45}
}
Meier, H. and Sadek, K. Design of Modular Service Architectures for Product Service Systems 2008 6th International Conference on Manufacturing Research (ICMR),  
BibTeX:
@inproceedings{Meier.2008j,
  author = {Meier, Horst and Sadek, Katja},
  title = {Design of Modular Service Architectures for Product Service Systems},
  booktitle = {6th International Conference on Manufacturing Research (ICMR)},
  year = {2008}
}
Meier, H. and Sadek, K. Industrial Product-Service-Systems - Integrated Development of Products and Services 2008 Proceedings of the 15th CIRP International Conference on Life Cycle Engineering (LCE), pp. 559-563  
BibTeX:
@inproceedings{Meier.2008s,
  author = {Meier, Horst and Sadek, Katja},
  title = {Industrial Product-Service-Systems - Integrated Development of Products and Services},
  booktitle = {Proceedings of the 15th CIRP International Conference on Life Cycle Engineering (LCE)},
  year = {2008},
  pages = {559--563}
}
Meier, H., Sadek, K., Uhlmann, E., Geisert, C., Stelzer, C. and Bochnig, H. Customer-Driven Development of Product-Service-Systems 2008 IProms 2008, pp. 147-152  
BibTeX:
@inproceedings{Meier.2008k,
  author = {Meier, Horst and Sadek, Katja and Uhlmann, Eckart and Geisert, Claudio and Stelzer, Christian and Bochnig, Holger},
  title = {Customer-Driven Development of Product-Service-Systems},
  booktitle = {IProms 2008},
  year = {2008},
  pages = {147--152}
}
Meier, H., Sadek, K., Uhlmann, E., Geisert, C., Stelzer, C. and Bochnig, H. Design of PSS based on Customer Requirements 2008 International Seminar on Product Service Systems, pp. 13-18  
BibTeX:
@inproceedings{Meier.2008l,
  author = {Meier, Horst and Sadek, Katja and Uhlmann, Eckart and Geisert, Claudio and Stelzer, Christian and Bochnig, Holger},
  title = {Design of PSS based on Customer Requirements},
  booktitle = {International Seminar on Product Service Systems},
  publisher = {Shaker Verlag},
  year = {2008},
  pages = {13--18}
}
Meier, H., Sadek, K., Welp, E. and Sadek, T. Modelling Approach for the Integrated Development of Product-Service-Concepts in the Early Phases of Development 2008 41th CIRP Conference on Manufacturing Systems, pp. 525-530  
BibTeX:
@inproceedings{Meier.2008m,
  author = {Meier, Horst and Sadek, Katja and Welp, Ewald and Sadek, Tim},
  title = {Modelling Approach for the Integrated Development of Product-Service-Concepts in the Early Phases of Development},
  booktitle = {41th CIRP Conference on Manufacturing Systems},
  year = {2008},
  pages = {525--530}
}
Meier, H., Siebel, C. and Nahr, M. Entwicklung eines präventiven Lieferantenmanagements gegen Produktpiraterie in der Investitionsgüterindustrie 2008 PPS Management,
Vol. 13, pp. 33-36  
BibTeX:
@article{Meier.2008n,
  author = {Meier, Horst and Siebel, Christian and Nahr, Michael},
  title = {Entwicklung eines präventiven Lieferantenmanagements gegen Produktpiraterie in der Investitionsgüterindustrie},
  journal = {PPS Management},
  year = {2008},
  volume = {13},
  pages = {33--36}
}
Meier, H., Siebel, C. and Nahr, M. Präventives Schutzkonzept gegen Produktpiraterie 2008 wt Werkstattstechnik online,
Vol. 7/8, pp. 648-652  
BibTeX:
@article{Meier.2008o,
  author = {Meier, Horst and Siebel, Christian and Nahr, Michael},
  title = {Präventives Schutzkonzept gegen Produktpiraterie},
  journal = {wt Werkstattstechnik online},
  year = {2008},
  volume = {7/8},
  pages = {648--652}
}
Meier, H., Smukala, V. and Buff, B. Roboterbasierte inkrementelle Blechumformung - Bauteilgenauigkeitssteigerung in einem automatisierten Gesamtkonzept 2008 wt Werkstattstechnik online,
Vol. 98/10, pp. 831-836  
BibTeX:
@article{Meier.2008p,
  author = {Meier, Horst and Smukala, Volker and Buff, Bolko},
  title = {Roboterbasierte inkrementelle Blechumformung - Bauteilgenauigkeitssteigerung in einem automatisierten Gesamtkonzept},
  journal = {wt Werkstattstechnik online},
  year = {2008},
  volume = {98/10},
  pages = {831--836}
}
Meier, H. and Völker, O. Industrial Product-Service Systems - Typology of Service Supply Chain for IPS$^2$ Providing 2008 The 41st CIRP Conference on Manufacturing Systems, pp. 485-488  
BibTeX:
@inproceedings{Meier.2008q,
  author = {Meier, Horst and Völker, Oliver},
  title = {Industrial Product-Service Systems - Typology of Service Supply Chain for IPS$^2$ Providing},
  booktitle = {The 41st CIRP Conference on Manufacturing Systems},
  publisher = {Springer Verlag},
  year = {2008},
  pages = {485--488}
}
Meier, H., Völker, O. and Binner, S. M. Ein ganzheitlicher aktiver Ansatz zum Schutz gegen Produktpiraterie 2008 Industrie Management,
Vol. 6, pp. 11-14  
BibTeX:
@article{Meier.2008r,
  author = {Meier, Horst and Völker, Oliver and Binner, Sebastian M.},
  title = {Ein ganzheitlicher aktiver Ansatz zum Schutz gegen Produktpiraterie},
  journal = {Industrie Management},
  year = {2008},
  volume = {6},
  pages = {11--14}
}
Meier, H., Völker, O. and Krug, C. Organization of PSS Delivery - Structures and Planning 2008 International Seminar on Product Service Systems, pp. 37-42  
BibTeX:
@inproceedings{Meier.2008t,
  author = {Meier, Horst and Völker, Oliver and Krug, Christian},
  title = {Organization of PSS Delivery - Structures and Planning},
  booktitle = {International Seminar on Product Service Systems},
  publisher = {Shaker Verlag},
  year = {2008},
  pages = {37--42}
}
Pierrot, F., Nabat, V., Company, O. and Krut, Sé. From Par4 to Adept Quattro 2008 3rd International Colloquium of the SFB 562, Robotic Systems for Handling and Assembly, pp. 207-220  
BibTeX:
@inproceedings{Pierrot.2008,
  author = {Pierrot, François and Nabat, Vincent and Company, Olivier and Krut, Sébastien},
  title = {From Par4 to Adept Quattro},
  booktitle = {3rd International Colloquium of the SFB 562},
  series = {Robotic Systems for Handling and Assembly},
  publisher = {Shaker Verlag},
  year = {2008},
  pages = {207--220}
}

 

Created by JabRef on 02/01/2017.